For the enthusiast who wants the most from their vehicle. Engineered and dyno-tested to give you improved acceleration, maximum hill climbing, towing and passing power. Our best performing exhaust system produces maximum torque and horsepower gains at low-end (1800 to 3000 RPMS ) with a deep aggressive exhaust tone.

Borla's T-304 stainless steel high performance exhaust system is built to last under extreme conditions. Borla exhaust systems give you more power and torque, longer engine life, precision fit, and the distinctive "BORLA Sound of Power" recognized by automotive enthusiasts around the world.

Using the all new 'continuous strand' Advantex packing material technology, Medalion Touring achieves extremely high levels of exhaust system efficiency, while maintaining a street drivable, extremely low frequency and deep tone that is well under 93db for discreet sports.

For the person who wants the look of a traditional dual exhaust system with all the benefits that a Flowmaster cat-back exhaust system provides. D.O.R. (Dual Out Rear) systems are the perfect choice. American Thunder systems deliver a moderate to aggressive interior and exterior tone and are suited to the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.

This aggressive sounding system is designed to replace the original rear mounted mufflers located behind the rear axle. With easy fit in mind, the system is mandrel bent for maximum performance and includes specially selected mufflers to support the performance image of the car. As an American Thunder system, it delivers an aggressive exterior tone with moderate interior sound level that is suited to the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, the system does require cutting of the factory system and includes all necessary parts and hardware for easy installation.

The Camco RV Gen-Turi Generator Exhaust Venting System helps reduce noise and keep the air fresh at RV rallies, campgrounds, and tailgate parties. This system allows you to vent offensive and unhealthy exhaust fumes from the top of your RV instead of at ground level where they might be inhaled by others. This system is easy to install and disconnects quickly, and weighs only nine pounds.

The Camco Gen-turi RV Generator Exhaust System is a venting system designed specifically for RV generators that provides for fresher air around RVs as well as reduces generator noise. The Gen-turi utilizes a tubing and coupling system to raise generator exhaust above the top level of your RV. It can be used with RVs utilizing virtually any exhaust pipes size by way of a variety of adapters. Additional features include: light weight design, a rubberized stabilizing/sound reduction system and a storage bag. Vent generator exhaust for cleaner air and quieter conditions. View larger. Reduce RV Generator Exhaust and Noise RV generators are a popular and convenient tool for providing instant power when you on the road, but close quarters at rallies, tailgate parties and at campgrounds create a need for a reduction in the noise and exhaust fumes that they generate. This is where Gen-turi comes in. The Gen-turi is made specifically for use with RV generators,* when the vehicle is at rest. It diverts nasty fumes away from the ground, where they can be inhaled by neighboring RVers and campers, allowing you all your comforts while remaining a good neighbor. As generator exhaust is vented above the roof line of the RV and is also air cooled in a patented process. Everything you need, including a range of adapters, right out of the box. View larger. Rising hot air draws in cooler air, diluting fumes and reducing noise. View larger. Easy assembly and quick disassembly when it is time to hit the road. View larger. Dilution of fumes leads to less rattle that is often transferred to the vehicle body, and then the surrounding area, resulting in reducing noise all around. The Gen-turi is also conveniently light weight at only nine pounds, and comes with its own soft storage bag. How it Works Exhaust "noise" comes from two sources: vibration and the sound made by the actual gases leaving the exhaust pipe. Most manufacturers mount generators in a manner that uses some type of rubber material to isolate the vibration of the generator. Even though the Gen-turi is rigidly secured to the exhaust system, rubber straps are used to stabilize the Gen-turi to the coach. This prevents transferring the vibration noise of the generator system to the coach. As an added benefit, the noise made by the gases discharging from the generator exhaust pipe is diverted upward, above the roof line of the coach. As a result, in most installations, the exhaust system is actually quieter with the Gen-turi installed. Compatibility The Camco Gen-turi Air Cooled Generator Exhaust System is designed for near universal compatibility. With that in mind it can be used with any recreational vehicle that utilizes an exhaust pipes with outside diameters of 1", 1¼", 1⅜", 1½", and 1⅝." Adapters required for 1¼", 1⅜", and 1½" are included. These will accommodate most installations. Adapters required for 1" and 1⅝" may be purchased separately. Key Features Vents RV generator exhaust up and away resulting in cleaner air for you and your neighbors Rubberized Gen-turi bungee and eye straps work together to limit vibration and reduce noise Minimal assembly required Dissembles quickly when you are ready to hit the road Wide range of adapters provided Provided storage bag means no lost parts What's in the Box 1 - top tube 1 - middle tube with coupling 1 - lower tube w/stainless steel elbow 1 - Gen-turi bungee with two S-hooks 1 - Gen-turi storage bag 2 - eye straps with 4 rivets and heavy-duty double-sided tape 1 - wire lock pin (D-Clip) 1 - 1½" muffler clamp 1 - 1½" mounting adapter 1 - 1¼" slotted bushing 1 - 1½" mounting adapter 1 - 1⅜" slotted bushing About Camco Manufacturing Located in Greensboro, North Carolina, Camco started in 1966 with one employee and one product. Today over 40 years later, they employ more than 350 employees and produce over 3,000 products in five manufacturing facilities. Competitive pricing, superior service, quality products and customer satisfaction are the foundations upon which Camco operates, while their friendly, knowledgeable customer service staff stands ready to assist our customers with any questions. *The Gen-turi should not be used on generators not specifically designed for and used in an RV.

For the person who wants the look of a traditional dual exhaust system with all the benefits that a Flowmaster cat-back exhaust system provides, D.O.R. (Dual Out Rear) systems are the perfect choice. American Thunder systems deliver a moderate to aggressive interior and exterior tone and are suited to the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.

Using the all new 'continuous strand' Advantex packing material technology, Medalion Touring achieves extremely high levels of exhaust system efficiency, while maintaining a street drivable, extremely low frequency and deep tone that is well under 93db for discreet sports.

If you are in the market for a replacement exhaust or just want something that offers you a little more power over stock, then look no further than Magnaflow for your aftermarket cat-back exhaust needs. Made of 100 percent stainless steel and then fully polished to give it that extra shine, Magnaflow cat-back systems not only perform, but also look good in the process. With applications available for vehicles, both new and old, ranging from passenger cars and racecars, to SUVs and off-road trucks and everything in between, Magnaflow Performance Exhaust offers it all. Designed to bolt right on to your vehicle, with half-inch overlapped welding at each joint, every system is dyno-proven to produce power all while providing years of trouble free performance. Regardless of which Magnaflow exhaust system you choose, you will be assured to have a smooth, deep, drone free tone at all times. This cat-back exhaust system has a 3 inch tubing, 4 inch single slash tip, 5 x 8 x 18 inch muffler and a rear side exit.

Flowmaster's race-oriented Outlaw systems are designed to replace original rear mounted mufflers located behind the rear axle using factory style connections. With easy fit in mind, these systems are mandrel bent for maximum performance and include specially selected mufflers. Outlaw systems deliver super aggressive interior and exterior tone and are suited to the enthusiast who wants the most aggressive components they can purchase. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.