Iron Manifold
Thanks for visiting our site!
Iron Manifold
Checkout Ebay Auctions For The Cheapest Prices
 |
 GSP MAZDA 3 2.0L FOCUS 2.3L T25 T28 CAST IRON TURBO MANIFOLD PERFORMANCE  US $139.95
|
 1988-1991 Honda CRX B16/B18//B20 Cast Iron Turbo Manifold US $59.99
|
| Powered by phpBay Pro |
Check out Amazon:
 |
Weiand 8126 Street Warrior Square/Spread Bore Satin Intake Manifold with 1987 and Later Cast Iron Heads List Price: $151.12 Sale Price: $145.84  |
|
Weiand Street Warrior Square/Spread Bore Satin Intake Manifold with 1987 and Later Cast Iron Heads has an all new optimized design for today’s higher output big block engines. It features a low rise dual plane design delivering friendly power and torque across the usable RPM range. This manifold is made from permanent mold 319 aluminum construction and is precision CNC machined providing lighter castings with better surface finishes. It has a universal dual pattern carb flange that accepts spread bore and square bore carbs. |
 |
Calyx Cast Iron Exhaust Manifold Dressing Sale Price: $20.99 |
|
Instant Cast Iron Luster With Calyx Manifold Dressing Make your vehicle's exhaust manifolds look new with Calyx. Easy to apply and long lasting. For optimum results, manifolds should be removed, abrasive blasted, and wiped down with PRE, before applying. If you wish to apply while the manifolds are installed on the engine, use a wire brush to remove surface rust and dirt, then wipe down with PRE. Apply Calyx with a rag or toothbrush, and work it into the pores of the metal. For a buffed appearance, use a fingernail brush. |
 |
2003 KIA Spectra 1.8 Catalytic Converter Manifold with Iron Cast Exhaust Manifold; Gasket Included Sale Price: $289.00 |
|
Fits the following vehicles: KIA SPECTRA 1.8 4 cylinder engine, 1.8 liter year: 2002, 2003, 2004 models: all models with 1.8L (1793CC) engine Directly replaces original KIA Spectra catalytic converter. Equipped with the highest quality iron cast exhaust manifold, resistant to thermal expansion and cracking Quick and simple installation, guaranteed to fit components of the exhaust system without any modifications, adjustments or welding Stainless steel manifold gasket included |
|
Weiand 8126P Street Warrior Square/Spread Bore Polished Intake Manifold with 1987 and Later Cast Iron Heads List Price: $215.63 Sale Price: $200.21 |
|
Weiand 8126P SBC STREET WARRIOR. 1987-UP POLISHED. |
 |
HKS 14019-XA001 Cast Iron Internal Turbo Exhaust Manifold List Price: $125.00 Sale Price: $125.00 |
|
HKS 14019-XA002 Cast Iron Internal Turbo Exhaust Manifold List Price: $225.00 Sale Price: $222.47 |
 |
MERCRUISER EXHAUST MANIFOLD GM 4.3L V6 (CAST IRON) | GLM Part Number: 51220; Mercury Part Number: 99746A17 Sale Price: $179.00 |
|
For 1983-Present Mercruiser Center Rise Exhaust Manifold GM 4.3L V-6 *All manifolds and risers are powdercoated black for maximum corrosion protection* **Cast Iron manifolds and risers come with a 3 year warranty** Note: Will Not fit dry joint risers (Engine Serial Numbers starting in OMxxxxxxxx ) Unless Both manifold and risers are replaced Use riser 51140 to complete the set. |
 |
KBS XTC (Xtreme Temperature Coating) - Cast Iron Grey - 8oz - Header Paint - Manifold Paint List Price: $21.95 Sale Price: $17.95 |
|
KBS Xtreme Temperature Coating is a high temperature/heat resistant coating formulated specifically to protect metal surfaces operating at temperatures from 500° F to 1500° F. Designed for Exhaust Headers and Manifolds. |
 |
Honda Acura B16 B18 Turbo Manifold Cast Iron T3 T4 Sale Price: $74.99 |
|
The VMS Racing Cast Iron Turbo Manifolds are excellent for those who are limited in Space and in need of a High quality Turbo Manifold. This Turbo Manifold Allows the use of a T3, T4 Turbocharger and a 35mm or 38mm external Wastegate. This product fits the following vehicles: ?Honda Civic Si, Del Sol VTEC, ?Acura Integra LS,RS,GS, GS-R, Type-R ?All other B Series Swaps |
 |
MERCRUISER COMPLETE EXHAUST MANIFOLD SET 5.0L & 5.7L (CAST IRON) | GLM Part Number: 58234 Sale Price: $639.99 |
|
For Post-1986 Mercruiser GM V8 -4 inch elbow -3 inch spacer In the V8 GM Small Block, GLM's fully tuned design guides exhaust gases directly to the riser without turbulance and back pressure. This increases the engine's performance up to 10%. These GLM manifolds also feature an additional 40% increase in water cooling area that decreases the manifold's overall body temperature significantly. In GLM's Mercruiser replacement 4 inch riser, there are two additional water jackets. This allows a higher volume of water to flow through the riser, keeping the engine cooler. *All manifolds and risers are powdercoated black for maximum corrosion protection* **Cast Iron manifolds and risers come with a 3 year warranty** |
Here are some more information for Iron Manifold:
Two often ignored but important parts of the vehicle's mechanical system is the exhaust and muffler systems. These two systems work together to help a car run at peak efficiency and performance. The exhaust system is a tubing system that takes exhaust gases created by the engine and guides them out the back of the vehicle. Typically, an exhaust system will have some of the following systems:
1. A muffler
2. A catalytic converter
3. A turbo charger
4. A cylinder head/exhaust manifold
The manifold collects the exhaust gas from two or more cylinders and puts them into one pipe. The manifold needs to be heavy duty because of the high temperatures, so they are often made of cast iron.
The header back is a part of an exhaust system that extends from the cylinder head back. It includes the outlet for the header, to the vent, to open air. This, like the turbo back, is an optional item that is put in to help increase the performance of a vehicle. The turbo back is the part of the exhaust that extends form the outlet of the turbo charger all the way to open air at the end.
The catalytic converter helps to reduce the exhaust emissions of the vehicle. Typically most cars will come with this but if the car is being produced for an area without exhaust restrictions, then the converter may not be installed as a result.
Before we get to the tail pipe, we come to the muffler. This is an important part of the exhaust system and one we never think about. Since exhaust gas is shooting out the exhaust system at high pressure, it creates a lot of noise. The muffler reduces the backpressure of the exhaust, while at the same time improving engine efficiency, engine performance, the power output of the car and it even reduces the wear and tear of engine components. The most significant aspect of the muffler is the noise reduction it creates.
Once we get to the very back of the exhaust system, we come to the tail pipe. The tail pipe is where all the exhaust comes out. Depending on the state of the engine, exhaust can come out white, grey or even black. If it comes out black, then there is usually a problem with the engine and it should go in to be fixed.
The great thing about the exhaust and the muffler is that if something goes wrong, it is not too hard to fix it, especially the farther you get away from the engine. If your muffler falls off, you will need a new one, if it develops a hole, you will need to get it patched. Thankfully, all of this can be done at any Los Angeles repair shop as the repairs of exhaust systems are generally quite easy to do.
Next time you go out for a drive, don't forget about the important part the exhaust system and muffler in your car plays for your vehicle and the environment around you.
[http://www.automobile.califindit.com] Troy Derringer is an automobile enthusiast who lives in the Greater Los Angeles area. He currently works for CaliFindIt.com, California's premier source of information. For a complete directory of the best automobile sales, service, and repair shops in California, visit [http://www.automobile.califindit.com] You will be able to utilize the map function to find the closest business to you and download coupons for any discounts the shop may currently be offering.
Want to Party Without Pains? Go Ahead and Have Fun
Dining room furniture comes in all varieties and prices and choosing the right one will always take time and effort. Moreover having bought the same, the job of maintaining and taking proper care of it is important. If the idea of giving parties gives you nightmares, you can relax hereafter and have a good time in the company of your friends and well wishers. Taking care of your dining set is in your hands and believe me - it is not nearly as difficult as you assume.
First things first. Let us have a look as to how to choose the right dining set for you and your family. Dining room tables are the most important piece of art of your dining set. They bind your other furniture items and act as the focal point. Your dining table may be Victorian, Classical, Modern or Contemporary. It may be made of wood or wrought iron. It may be rectangle, oval or round shaped.
Wooden dining tables are elegance personified. Mind you, nothing can beat a well crafted and designed wooden table that enhances the dignity of your place manifold. You need to take proper care of your table as it is the most vulnerable of all your items. Daily use may well result in scratches, burns, spots and marks emerging to destroy its beauty. Invest in a proper table pad. It will protect your table for years together. Replacing the top of a wooden dining table would not be an ideal proposition in terms of cost or aesthetics. So it is better to be careful and meticulous while using your favorite table.
Wooden dining room chairs also need proper maintenance and care. Do not lean on your chairs’ handles as these may expand and open from corners. Varnishing and polishing at frequent intervals is important to have that impeccable look. If your chairs have leather upholstery, make sure to be extra careful while using the same, as a replacement may cost you dear. Use proper cushions and tapestries to protect the surface. This would also add to the life of your chairs considerably. The same also goes for your dining sofas. Avoid eating oily stuff while sitting over your sofas as even a few marks on it will tarnish its beauty forever. To avoid this, you can have replaceable covers which can be washed at home.
A wooden dining room hutch is another article that adds to the beauty of your place. Make sure that you cover the top of the hutch with proper fabric or plastics. If you place certain items on top of your hutch, ensure that these are not abrasive or rough on the edges as they may result in permanent scratches. The front glass used in a hutch needs frequent cleaning and careful handling. If you are keeping your utensils in hutch, dry them before storing as water marks are difficult to remove.
Since you are spending a good deal on your dining furniture, it becomes all the more important for you to take good care of it. Using these tips will ensure your furniture lasts forever.
About the Author
The author is an expert in interior design and home improvement techniques. It is essential to buy a table pad to protect your dining room table. With good care, your dining furniture will last you a lifetime.
I have a very old exhaust manifold which is cast iron and cracked?
I can manufacture a new one but would like to try to repair this unit as it has the original casting numbers etc. I understand the metal is not in good condition for welding ; but perhaps someone out there has a technich I can try. I am a competent welder of some 25 years experience on stick , mig ,tig and gas. I believe I will have one shot at this and either fix it or stuff it. My aim is to repair the cracking and bring it back to original with no tell tale signs of repair. can anyone out there help.
Kind Regards The BOLT
the best is getting a ricon o a secondhand exhaust..no point in servicing it..u r burning more fuel if ur exhaust have a small crack..but i bet urs is a bigger crack.. u also mite wanna test aluminum exhaust..it is lite weight and durable..and u mention about the code no.. but i guess this car is out of warranty seen u claim its a very old exhaust....
MTE Massages Golf R32
German tuner MTE's Golf R32 BiTurbo gets even more tweaking. | July 21, 2010 | MTE MTE updates its own Golf R32 BiTurbo. The VW now pumps out 785 horsepower and 586 pound-feet of torque.
Thanks for visiting!
Be the first to comment.