RSS Feed

Inch Exhaust

Posted on Wednesday, July 29, 2009 in Exhaust Pipes And Tips

Thanks for visiting our site!
Inch Exhaust
Checkout Ebay Auctions For The Cheapest Prices

OBX Exhaust Muffler Clamps Clamp 2
OBX Exhaust Muffler Clamps Clamp 2" Inch Pipe Clamp
Paypal   US $10.00
2 bolt exhaust muffler catback / header 2.5 inch steel flange + gasket
2 bolt exhaust muffler catback / header 2.5 inch steel flange + gasket
Paypal   US $12.99
2 bolt stretch exhaust muffler catback / header 2.5 inch steel flange + gasket
2 bolt stretch exhaust muffler catback / header 2.5 inch steel flange + gasket
Paypal   US $12.99
Jeep CJ Wrangler YJ TJ JK New Exhaust Clamp 2-3/4 Inch # 17620.14
Jeep CJ Wrangler YJ TJ JK New Exhaust Clamp 2-3/4 Inch # 17620.14
Paypal   US $16.78
ORIGINAL Two Inch Exhaust Manifold Heat Riser for 75-79 Corvette
ORIGINAL Two Inch Exhaust Manifold Heat Riser for 75-79 Corvette
Paypal   US $50.00
ORIGINAL Two Inch Exhaust Manifold Heat Riser for 1975-1979 Corvette
ORIGINAL Two Inch Exhaust Manifold Heat Riser for 1975-1979 Corvette
Paypal   US $50.00
Door Port for 3 Inch Exhaust Hose CRUADF30 Crushproof T
Door Port for 3 Inch Exhaust Hose CRUADF30 Crushproof T
Paypal   US $45.00
Exhaust Hose Y-Connector for 3 Inch Tubing
Exhaust Hose Y-Connector for 3 Inch Tubing
Paypal   US $45.31
Exhaust Long Dong Muffler 2 inch inlet 17 inch length
Exhaust Long Dong Muffler 2 inch inlet 17 inch length
Paypal   US $64.87
Walker 35753 3 1/2 Inch Exhaust Clamp
Walker 35753 3 1/2 Inch Exhaust Clamp
Paypal   US $11.91
Chrome exhaust pipe extention slash cut design 3 inch
Chrome exhaust pipe extention slash cut design 3 inch
Paypal   US $70.06
Exhaust Cap Assemblies for 2 inch Pipe, Set of 10
Exhaust Cap Assemblies for 2 inch Pipe, Set of 10
Paypal   US $33.00
GM Style Muffler Exhaust Clamp 2 1/8 Inches Made-in-USA
GM Style Muffler Exhaust Clamp 2 1/8 Inches Made-in-USA
Paypal   US $9.99
MANDREL BEND 180 DEGREE J 3inch 409 STAINLESS STEEL16ga
MANDREL BEND 180 DEGREE J 3inch 409 STAINLESS STEEL16ga
Paypal   US $39.95
Sierra 18-4456 P Exhaust Shutter 3 Inch-
Sierra 18-4456 P Exhaust Shutter 3 Inch-
Paypal   US $20.83
09/27/93 to 1994 Dodge Ram Pick Up 1500 2500 Muffler Exhaust System 135Inch WB
09/27/93 to 1994 Dodge Ram Pick Up 1500 2500 Muffler Exhaust System 135Inch WB
Paypal   US $119.00
MBRP 4
MBRP 4" inch Truck Stainless Dodge Ford Chevy Diesel Turn Down Exhaust Tip T5081
Paypal   US $49.99
 2 FLOWMASTER 4 INCH EXHAUST HEADER TAILPIPE TURNDOWNS
2 FLOWMASTER 4 INCH EXHAUST HEADER TAILPIPE TURNDOWNS
Paypal   US $50.00
Sea Dog 521125 Exhaust Thru-Hull 2-1/2 inch Stainless Steel
Sea Dog 521125 Exhaust Thru-Hull 2-1/2 inch Stainless Steel
Paypal   US $63.87
Formed Clamp 2 Inch Exhaust, 3 Inch wide
Formed Clamp 2 Inch Exhaust, 3 Inch wide
Paypal   US $11.99
323691, Manifold, Exhaust, 20 Inch Transom 1981 Evinrude 70 hp, Model E70ELCIM
323691, Manifold, Exhaust, 20 Inch Transom 1981 Evinrude 70 hp, Model E70ELCIM
Paypal   US $149.99
MBRP Exhaust Tip T5085 Tip 5
MBRP Exhaust Tip T5085 Tip 5" Turn Down 5 inch inlet 14" length T304 Diesel SS
Paypal   US $74.99
MBRP Angled Diesel Exhaust Tip (4
MBRP Angled Diesel Exhaust Tip (4" Inlet, 6" Outlet) T5072 6 inch out 4 inch in
Paypal   US $70.64
8 STAINLESS STEEL CABLE TIES STRAP EXHAUST WRAP 8 INCH
8 STAINLESS STEEL CABLE TIES STRAP EXHAUST WRAP 8 INCH
Paypal   US $7.87
Exhaust Riser Marine Mercruiser 3 Inch Outlet 15 Degree V6 V8 1883-1986 Osco
Exhaust Riser Marine Mercruiser 3 Inch Outlet 15 Degree V6 V8 1883-1986 Osco
Paypal   US $99.00
Exhaust Riser Marine Pleasurecraft PCM 3 Inch Outlet Ford GM V8 Osco
Exhaust Riser Marine Pleasurecraft PCM 3 Inch Outlet Ford GM V8 Osco
Paypal   US $99.95
MERCRUISER 4 INCH  - 3 INCH  EXHAUST BOOT / SS CLAMPS
MERCRUISER 4 INCH - 3 INCH EXHAUST BOOT / SS CLAMPS
Paypal   US $21.99
2.45 Inch Inlet Car Auto Universal Exhaust Pipe Muffler
2.45 Inch Inlet Car Auto Universal Exhaust Pipe Muffler
Paypal   US $19.63
OMC COBRA 4 1/2 - 3 1/2 INCH  EXHAUST BOOT / SS CLAMPS
OMC COBRA 4 1/2 - 3 1/2 INCH EXHAUST BOOT / SS CLAMPS
Paypal   US $21.99
Exhaust Elbow Crusader Marine 4 Inch Outlet Upper Swivel Style Osco
Exhaust Elbow Crusader Marine 4 Inch Outlet Upper Swivel Style Osco
Paypal   US $109.95
Exhaust Riser Marine 4 Inch Outlet Crusader XL Series 5.0, 5.7, 7.4, 8.2 Osco
Exhaust Riser Marine 4 Inch Outlet Crusader XL Series 5.0, 5.7, 7.4, 8.2 Osco
Paypal   US $119.95
2 & 1/2 INCH CORVETTE RAMS HORN EXHAUST MANIFOLD
2 & 1/2 INCH CORVETTE RAMS HORN EXHAUST MANIFOLD
Paypal   US $129.00
CARBON FIBER 4
CARBON FIBER 4" EXHAUST MUFFLER HONDA DEL SOL CRX CIVIC
Paypal   US $39.95
Universal Carbon Fiber Exhaust Muffler Probe Taurus
Universal Carbon Fiber Exhaust Muffler Probe Taurus
Paypal   US $39.95
Mazda MX 3/5/6 RX7 Miata Carbon Fiber Exhaust Muffler
Mazda MX 3/5/6 RX7 Miata Carbon Fiber Exhaust Muffler
Paypal   US $39.95
06-10 07 08 09 Honda Civic Carbon Fiber Exhaust Muffler
06-10 07 08 09 Honda Civic Carbon Fiber Exhaust Muffler
Paypal   US $39.95
OEM MerCruiser V6 V8 Exhaust RISERS Elbows Riser 4
OEM MerCruiser V6 V8 Exhaust RISERS Elbows Riser 4" 4 inch 807988-C 807988Q03
Paypal   US $125.95
2.4 Inch Inlet Car Silver Tone Exhaust Muffler Pipe
2.4 Inch Inlet Car Silver Tone Exhaust Muffler Pipe
Paypal   US $12.95
Harley,tan exhaust wrap,new 50 foot toll,1 inch wide
Harley,tan exhaust wrap,new 50 foot toll,1 inch wide
Paypal   US $45.99
Oval 3 inch  2 Bolt Catback Downpipe Exhaust Gasket UNIVERSAL RF8006 WRX STI
Oval 3 inch 2 Bolt Catback Downpipe Exhaust Gasket UNIVERSAL RF8006 WRX STI
Paypal   US $12.99
2.0 BLACK Shorty short Moto GP EXHAUST MUFFLER stubby 2' inch black
2.0 BLACK Shorty short Moto GP EXHAUST MUFFLER stubby 2' inch black
Paypal   US $62.99
1 3/4 BLACK Shorty short Moto GP EXHAUST MUFFLER  1.75 inch & three quarter
1 3/4 BLACK Shorty short Moto GP EXHAUST MUFFLER 1.75 inch & three quarter
Paypal   US $62.99
Crushproof Aluminum Door Port For 4 Inch Exhaust Hose ADF40
Crushproof Aluminum Door Port For 4 Inch Exhaust Hose ADF40
Paypal   US $41.99
Pair Sierra Seachoice 3
Pair Sierra Seachoice 3" Boat Exhaust Flapper Guards Clamps Salisbury EG300 inch
Paypal   US $25.95
Jeep CJ Wrangler YJ TJ JK New Exhaust Clamp 2-3/4 Inch  *17620.14
Jeep CJ Wrangler YJ TJ JK New Exhaust Clamp 2-3/4 Inch *17620.14
Paypal   US $13.25
Right & Left Set of 2 Exhaust Pair New Natural 27 inch Oval RH LH Side Hand Auto
Right & Left Set of 2 Exhaust Pair New Natural 27 inch Oval RH LH Side Hand Auto
Paypal   US $178.68
Exhaust Tip Chrome Plated  2.5 X 8 Flat Rolled 2.00 inch inlet
Exhaust Tip Chrome Plated 2.5 X 8 Flat Rolled 2.00 inch inlet
Paypal   US $32.49
MANDREL BEND 180 DEGREE U 3inch 304 STAINLESS STEEL16ga
MANDREL BEND 180 DEGREE U 3inch 304 STAINLESS STEEL16ga
Paypal   US $53.95
FORD LINCOLN 2
FORD LINCOLN 2" 52MM EGT EXHAUST GAS TEMPERATURE GAUGE
Paypal   US $39.99
AUDI  VW  JDM 2
AUDI VW JDM 2" 52MM EGT EXHAUST GAS TEMPERATURE GAUGE
Paypal   US $39.99
Powered by phpBay Pro

Check out Amazon:
Superior 28-6202 3 Superior 28-6202 3" x 7" Stainless Steel, Slant Bolt-On Exhaust Tip
List Price: $26.99
Sale Price: $11.89

Superior 28-6202 3" x 7" Stainless Steel, Slant Bolt-On Exhaust Tip

Magnaflow 35136 Stainless Steel 2.5 Magnaflow 35136 Stainless Steel 2.5" Exhaust Tip
List Price: $57.12
Sale Price: $26.48

Magnaflow Stainless Steel 2.5 inch Exhaust Tip is designed to reduce exhaust gas pressure and enhances the performance of the exhaust system. It is manufactured from high strength stainless steel and come in mirror-like finish. This exhaust tip feature a inch tip. It is corrosion resistant and is backed by lifetime warranty.

Walker Exhaust 35408 Hardware-Clamp Walker Exhaust 35408 Hardware-Clamp
List Price: $2.79
Sale Price: $1.15

Walker has everything from brackets and clamps to connectors and specialty pipes - all the accessories you need to do the complete exhaust job. Walker is your one-stop exhaust shop offering a full line of pipes and accessories.

Mr. Gasket 5961 Ultra Seal Exhaust Gasket Material Mr. Gasket 5961 Ultra Seal Exhaust Gasket Material
List Price: $23.49
Sale Price: $15.23

Mr. Gasket Ultra Seal Exhaust Gasket Material gives the ability to custom-make your own gasket. The length of the material is 24" and its width is 6". This 1/16" thick exhaust gasket material is used for special applications.

Magnaflow 35131 Stainless Steel 2.25 Magnaflow 35131 Stainless Steel 2.25" Exhaust Tip
List Price: $48.65
Sale Price: $23.97

Magnaflow Stainless Steel 2.25 inch Exhaust Tip is designed to reduce exhaust gas pressure and enhances the performance of the exhaust system. It is manufactured from high strength stainless steel and come in mirror-like finish. This exhaust tip feature a inch tip. It is corrosion resistant and is backed by lifetime warranty.

Camco 44461 RV Gen-Turi Generator Exhaust Venting System Camco 44461 RV Gen-Turi Generator Exhaust Venting System
List Price: $188.83
Sale Price: $103.99

The Camco RV Gen-Turi Generator Exhaust Venting System helps reduce noise and keep the air fresh at RV rallies, campgrounds, and tailgate parties. This system allows you to vent offensive and unhealthy exhaust fumes from the top of your RV instead of at ground level where they might be inhaled by others. This system is easy to install and disconnects quickly, and weighs only nine pounds.

The Camco Gen-turi RV Generator Exhaust System is a venting system designed specifically for RV generators that provides for fresher air around RVs as well as reduces generator noise. The Gen-turi utilizes a tubing and coupling system to raise generator exhaust above the top level of your RV. It can be used with RVs utilizing virtually any exhaust pipes size by way of a variety of adapters. Additional features include: light weight design, a rubberized stabilizing/sound reduction system and a storage bag. Vent generator exhaust for cleaner air and quieter conditions. View larger. Reduce RV Generator Exhaust and Noise RV generators are a popular and convenient tool for providing instant power when you on the road, but close quarters at rallies, tailgate parties and at campgrounds create a need for a reduction in the noise and exhaust fumes that they generate. This is where Gen-turi comes in. The Gen-turi is made specifically for use with RV generators,* when the vehicle is at rest. It diverts nasty fumes away from the ground, where they can be inhaled by neighboring RVers and campers, allowing you all your comforts while remaining a good neighbor. As generator exhaust is vented above the roof line of the RV and is also air cooled in a patented process. Everything you need, including a range of adapters, right out of the box. View larger. Rising hot air draws in cooler air, diluting fumes and reducing noise. View larger. Easy assembly and quick disassembly when it is time to hit the road. View larger. Dilution of fumes leads to less rattle that is often transferred to the vehicle body, and then the surrounding area, resulting in reducing noise all around. The Gen-turi is also conveniently light weight at only nine pounds, and comes with its own soft storage bag. How it Works Exhaust "noise" comes from two sources: vibration and the sound made by the actual gases leaving the exhaust pipe. Most manufacturers mount generators in a manner that uses some type of rubber material to isolate the vibration of the generator. Even though the Gen-turi is rigidly secured to the exhaust system, rubber straps are used to stabilize the Gen-turi to the coach. This prevents transferring the vibration noise of the generator system to the coach. As an added benefit, the noise made by the gases discharging from the generator exhaust pipe is diverted upward, above the roof line of the coach. As a result, in most installations, the exhaust system is actually quieter with the Gen-turi installed. Compatibility The Camco Gen-turi Air Cooled Generator Exhaust System is designed for near universal compatibility. With that in mind it can be used with any recreational vehicle that utilizes an exhaust pipes with outside diameters of 1", 1¼", 1⅜", 1½", and 1⅝." Adapters required for 1¼", 1⅜", and 1½" are included. These will accommodate most installations. Adapters required for 1" and 1⅝" may be purchased separately. Key Features Vents RV generator exhaust up and away resulting in cleaner air for you and your neighbors Rubberized Gen-turi bungee and eye straps work together to limit vibration and reduce noise Minimal assembly required Dissembles quickly when you are ready to hit the road Wide range of adapters provided Provided storage bag means no lost parts What's in the Box 1 - top tube 1 - middle tube with coupling 1 - lower tube w/stainless steel elbow 1 - Gen-turi bungee with two S-hooks 1 - Gen-turi storage bag 2 - eye straps with 4 rivets and heavy-duty double-sided tape 1 - wire lock pin (D-Clip) 1 - 1½" muffler clamp 1 - 1½" mounting adapter 1 - 1¼" slotted bushing 1 - 1½" mounting adapter 1 - 1⅜" slotted bushing About Camco Manufacturing Located in Greensboro, North Carolina, Camco started in 1966 with one employee and one product. Today over 40 years later, they employ more than 350 employees and produce over 3,000 products in five manufacturing facilities. Competitive pricing, superior service, quality products and customer satisfaction are the foundations upon which Camco operates, while their friendly, knowledgeable customer service staff stands ready to assist our customers with any questions. *The Gen-turi should not be used on generators not specifically designed for and used in an RV.

3A Racing 62-2419 Stainless Exhaust Tip Slant Bolt-On Truck 3 3A Racing 62-2419 Stainless Exhaust Tip Slant Bolt-On Truck 3" Inlet X 11"
Sale Price: $23.17

Constructed of stainless steel. Lifetime warranty. Universal applications. No welding required. Held on securely with set screws.

Godspeed 2 Bolt 2.50 Godspeed 2 Bolt 2.50" Inch Exhaust Flange + Gasket
Sale Price: $10.99

2 bolt exhaust / downpipe flange made of high quality mild steel approx. 2.5 inlet diameter bolt to bolt 115mm hole size 1/2

Cherry Bomb 87522 Glasspack Muffler Cherry Bomb 87522 Glasspack Muffler
List Price: $46.67
Sale Price: $28.99

The original high performance glasspack muffler since 1968. Features the legendary deep and mellow Cherry Bomb sound. Straight-thru design reduces back pressure and maximizes horsepower. It has universal fit and header styles.

Sunpentown 5 inch Exhaust Hose (10010) Sunpentown 5 inch Exhaust Hose (10010)
List Price: $64.00
Sale Price: $36.65

Sunpentown 5 inch Exhaust Hose (10010)


Here are some more information for Inch Exhaust:
Inch Exhaust

Design of Local Exhaust Systems for Industrial Air Cleaning

Local exhaust ventilation systems are designed to capture airborne chemicals at the source of generation and remove contaminants from the work area. When a local exhaust system does its job your workers are healthy and productive. It usually consists of:

- hoods for capturing the contaminant

- ducts for transporting the contaminant

- air cleaner for removing contaminants from the air stream

- fan to create airflow in the system

- stack to discharge the air outside the workplace.

To design a Local Exhaust System we must know the:

* physical state of the chemical (Is it a dust, mist, fume, gas or vapor ?),

* chemical's toxicity and applicable exposure limits,

* physical properties of the chemical (Vapor pressure, boiling point, flash point),

* routes of worker exposure -- inhalation, ingestion, skin contact,

* how, where and when the chemical is used,

* how the worker does their job.

HOOD DESIGN

A well-designed hood is the most important component of an effective LEVS. The hood must be positioned so that it does not pull contaminated air through the worker's breathing zone. It should be easy to use and not interfere with the job that the worker is trying to do. It should be positioned as close to the point of contaminant generation as possible. The further it is from the point where the chemical is released into the air, the more airflow is required to capture the contaminant.

AIR VOLUME AND CAPTURE VELOCITY

The air volume (cubic feet per minute) that must be exhausted by LEVS is determined by the type of hood, the distance of the hood from the source of the contaminant and the velocity needed to capture the contaminant (Capture Velocity). Capture velocity for a hood is determined by the properties of the chemical and how it is being used. Examples of capture velocities are shown in Table 1.

MAKE UP AIR

Air will only be exhausted to the extent that air enters the workplace. If you don't provide make up air in the amount at least equal to the amount of air being exhausted, your LEVS will not work properly and the workplace will be very drafty, doors will be difficult to open, and furnaces, heaters or other combustion equipment may back draft.

TRANSPORT VELOCITY AND DUCT SIZE

Once a contaminant is captured by the hood it moves into the duct system. The velocity in the duct must be sufficient to transport the contaminant through the LEVS. The velocity in the duct necessary to carry the contaminant through the system is referred to as the transport velocity. The heavier the contaminant the higher the velocity needed for transport. Some examples of transport velocities for different contaminants are shown in Table 2. Once you know the airflow volume and transport velocity needed for a LEVS, the duct size can be calculated using the formula shown in Table 3.

sTREAMLINE AIR FLOW

Local exhaust systems should always use round ducts, because airflow is more uniform and streamlined, which makes the system more efficient and provides better transport for contaminants. The duct runs should be as straight as possible; curves should be smooth and gradual; and an elbow should have a radius of 2 to 2.5 times the duct diameter. Branch entries into the main duct should be at an angle of 45?; there should be no 90? entries. All changes in size should be smooth and gradual.

STACKS

A stack should discharge contaminated air vertically upward and away from the building. Stacks should be located as far from air intake units as possible to prevent reintroduction of contaminated air into the building. The top of the stack should be 1.3 to 2 times the building height above the ground. Avoid exhausting air out of the sides of buildings. The pressure of prevailing winds blowing into the exhaust can severely affect the performance of the LEVS.

FAN SELECTION

The fan you select for your LEVS should be based on the needs of the system. It should not only deliver the volume of air (in cubic feet per minute) necessary to capture the contaminant but be able to do so against the resistance to airflow in the system. The resistance to airflow is measured in inches of water and is usually referred to as static pressure losses. Static pressure losses in LOCAL EXHAUST SYSTEM are determined by the:

- size of the duct,

- roughness of the duct material,

- number and type of elbows, entries, and changes in size,

- type of air cleaner,

- type of hood,

- volume of air flowing in the system,

- stack design.
 
It should be clear from this list that a fan cannot possibly be selected successfully until the system has been designed.

SYSTEM INSTALLATION

Insist that you get a system installed as designed, with round ducts and smooth streamlined airflow. Since a rough duct increases static pressure losses and requires a larger fan, you should keep the use of a flexible duct, which is very rough, to a minimum. Use a flexible duct only where you need flexibility and use as little of it as possible.

Fans will operate more efficiently if they are installed with a length of straight duct entering and leaving the fan. A rule of thumb is to provide a straight run of duct at least six duct diameters long on the entrance side of the fan and at least two duct diameters long on the exit side. After installing the system, measure to ensure that the LEVS delivers the airflow volume and velocity that is needed to do the job.

For additional information please refer to http://nis-co.com/dustcollector/Index.html.

Oleg Tchetchel
Process Engineer
Canadian Air Systems
http://www.nis-co.com/fumeextractor/Index.html
http://www.nis-co.com/scrubber/Index.html

About the Author

Oleg Tchetchel
Designer of Air Moving Systems
Canadian Air Systems
http://nis-co.com/contact/Index.html

Suggestions for an exhaust for my 05 TC?

I am looking for an exhaust for my car but I cannot stand the whole bumble bee 50 inch exhaust. I want to add one for performance but would like an exhaust that provides a nice deep tone without sounding like crap.

Whats out there thats even remotely in the ballpark of what I am asking?

I have an 05 too and the HKS sounds the best to me. You can go on youtube.com and type in scion tc exhaust and see which one you like the best

12°C - Sunny Spells with only patchy cloud
A MODEL and mum of four killed her boyfriend with a single bullet to the head after he stayed out all night.

Thanks for visiting!

Share and Enjoy:
  • Print
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks
  • Blogplay

Be the first to comment.

Leave a Reply