Your headlight lens is an engineered system and needs to be properly restored for best performance. The Sylvania headlight restoration kit uses exclusive technology to restore hazy and sun damaged headlight lenses. This easy-to-use kit provides clarity and durable, long lasting protection in less than 30 minutes.

Hazy, yellowed headlights are an inevitable consequence of weather and wear on plastic headlight lenses that is both unsightly and dangerous, as light output lessens and glare is increased. Restore original clarity and vision to plastic headlight lenses in minutes with the Headlight Restoration Kit from Sylvania. The Sylvania Restoration Kit is easy to use in three simple steps, requires no tools and is the only headlight restoration kit currently available that comes with a finishing UV-resistant clear coat application, designed to preserve lens clarity. Headlight restoration that provides up to 3 times more light and up to a 70% reduction in glare. View larger. The Headlight Restoration Kit from Sylvania Will: Remove unsightly yellowing and haze Improve downroad vision by up to 3X Dramatically reduce glare your headlights put off Provide a UV barrier coating to prevent future deterioration Save you time, as no tools are needed and project completion on 2 lenses is estimated at 30 minutes Restore headlight lens performance. View larger. Dramatic before and after results. View larger. Plastic Headlights Degrade Over Time New plastic headlight lenses have a factory applied UV coating to protect the plastic from degradation. Over time, harsh UV rays and road debris penetrate the factory UV coating resulting in hazing and yellowing. This hazing is not only unsightly, it is a serious safety concern, in fact hazed lenses reduce downroad illumination by 66% and increases oncoming driver glare by scattering light upward. Permanent Restoration from the Lighting Experts at Sylvania Unlike other lens restoration products designed just to remove the haze and yellowing, the Sylvania Headlight Restoration Kit restores the lens to like-new clarity and protection using our proprietary UV Block Clear Coat. This easy-to-apply durable coating has engineered polymers as well as active and passive UV blockers to protect the plastic from future deterioration. No other product offers this level of protection. Amazing Results…Saving Hundreds of $$ in Replacement Costs With a 30 minute restoration, downroad illumination is improved by 3 times and glare, caused by refraction of head lamp light through clouded and scratched lenses, is reduced by 70%. In addition, by using the Sylvania Headlight Restoration Kit lenses are restored to a like new appearance at a fraction of the cost of an all-new lens replacement job, which can cost over $300 a pair. Easy and Simple to Use The Sylvania Headlight Restoration Kit includes everything you need to restore 2 plastic headlight lenses. And with its tool-free design virtually anyone can regain crystal clear, like-new headlights in as little as 30 minutes via three simple steps. It isn’t like so many other kits on the market, that require drills and attachments and power cords. All you need to provide is water and maybe a few extra paper towels. Simple, Tool-Free Restoration in Three Easy Steps Three simple, tool-free steps to new-looking headlights Step 1: Preparation Wash lenses, mask painted surface (tape included in kit). Next, spray on the Surface Activator--a proprietary surface corrosion softener only from Sylvania. Immediately, you’ll see the yellow gunk start to break down. Step 2: Sand/Polish Remove corrosion with a wet-sanding process using the provided 3 grades of premium waterproof sanding papers (400, 1000, 2000 grit). You’ll notice the lens to take on a cloudy, smooth finish. Apply the oil-free Clarifying Compound. Already, this step will help you feel confident in the kit’s ability. You’ll be amazed at how clear the lenses will be. Step 3: Clarify/Seal You’ll then apply the UV Block Clear Coat. It’s simple. Just apply as instructed in smooth, even applications. This UV Block Clear coat is a specially formulated polymer coating with active and passive UV blockers. This is the component that gives you long-lasting results. What Critics Are Saying About the Sylvania Headlight Restoration Kit "Sylvania's [Headlight Restoration Kit] is the only headlight restoration kit that comes with a finishing UV-resistant clear coat to preserve lens clarity." --Popular Mechanics (Editor's Choice Award) Lifetime Warranty Not only does this headlight restoration kit provide you with fantastic results, but it's backed by Sylvania's Lifetime Warranty. Simply register at www.sylvania.com/hrkwarranty and Sylvania will replace the kit if your headlight lenses become clouded again (restrictions apply). What's in the Box 1 oz. of surface activator ½ oz. of clarifying compound 1 oz. of UV blocking Clear Coat 3 grades of waterproof premium sandpaper (400, 1000 and 2000 grit) 2 white applicator cloths 1 blue lint-free UV Clear Coat applicator cloth 1 roll of protective tape 1 vinyl glove About Osram Sylvania Osram Sylvania, together with Osram GmbH, is the world leader in automotive lighting for original equipment manufacturers (OEMs) and the aftermarket. The company’s global automotive lighting division has its principal North American operations in Hillsboro, N.H., with nearly 500 employees. In addition to TS 16949, this facility has also achieved ISO 9001 and 14001 certifications. Automotive Lighting designs, develops, manufactures and markets state-of-the-art automotive light sources, including auxiliary, advanced halogen, LED and high-intensity discharge lighting for interior, exterior and forward lighting applications. More than 400 lamp types are produced for cars, trucks, and electronics in facilities throughout the U.S., Europe, and Asia. Automotive applications for OEMs are marketed under the Osram brand while products for the aftermarket are sold under the Sylvania brand. * Actual results will depend on the severity of UV degradation. Greater existing UV damage will allow for greater performance improvements.

Plastic lenses can yellow with age, reducing headlight brightness, and new lenses can be expensive. The 3M Headlight Lens Restoration System lets you shine and restore plastic lenses, including headlights, taillights, fog and directional lights. By restoring clarity to the lens, the performance of the headlight is improved and the appearance of the vehicle is enhanced Now you can produce professional results with the 3M Headlight Lens Restoration System and a household drill (1200-1600 rpm). Kit includes all items necessary to perform the task except for the drill, tape and clean cloth.

In the past, replacing scratched, clouded or yellowed plastic headlight covers was an expensive necessity in order to preserve safety. But now with the 3M Headlight Lens Restoration System, car and motorcycle owners can shine and restore plastic lenses — including headlights, tail lights, fog and directional lights — to like-new condition for a fraction of the cost. This kit includes everything needed to restore two headlight lenses, excluding the user-supplied household drill (1200-1600 rpm), automotive tape, clean cloth, and spray bottle. .caption { font-family: Verdana, Helvetica neue, Arial, serif; font-size: 10px; font-weight: bold; font-style: italic; } ul.indent { list-style: inside disc; text-indent: -15px; } table.callout { font-family: verdana; font-size: 11px; line-height: 1. 3em; } td.vgoverview { height: 125px; background: #9DC4D8 url(http://images.amazon.com/images/G/01/electronics/detail-page/callout-bg.png) repeat-x; border-left: 1px solid #999999; border-right: 1px solid #999999; padding-left: 20px; padding-right: 20px; padding-bottom: 10px; width: 250px; font-family: verdana; font-size: 12px; } Restore clouded plastic headlights to crystal clarity. View larger. Plastic headlight repair in 3 steps. View larger. 2-step sanding process. View larger. Buff and polish. View larger. And see clearly again. View larger. Clouded Plastic Headlights Plastic surfaces are great for giving vehicles lightweight, durable components – from plastic headlight lenses to motorcycle windshields, plastic tail lights, trailers and more. But these plastic components can yellow and haze with weather, sun and sand, limiting visibility and diminishing the appearance and value of the vehicle. While the impact on a vehicle's value varies, the dangers in terms of limited visibility are clear: It is a factor in 2.8 million accidents, 23,000 fatal crashes and 2,300 pedestrian deaths each year, according to the Motor Vehicle Lighting Council. Dim headlight bulbs and hazy plastic headlight lenses or surfaces may lead to this reduced visibility, putting you, your passengers and other cars at risk. The AAIA Car Care Council found that 26 percent of the cars it inspected had issues with their lighting system. Millions of cars on the road today have plastic headlight lenses. The problem increases with the age of the lens, and with the average age of cars on the road about 10 years old, the problem is growing. Yet there is something you can do about it. The Do-It-Yourself Solution The 3M Headlight Lens Restoration System is designed to give do-it-yourselfers an easy and affordable way to repair their vehicle's plastic lens surfaces. Containing various graded sanding pads, pad holders, buffing pads, polish and detailed instructions, it includes everything users need to turn their household drill into a low cost solution to this dangerous automotive problem. The Lens Renewal Kit can also be used to repair hazing on other plastic surfaces, including taillights, emergency light bars, plastic motorcycle lights, trailers, snowmobiles and more. Compared to having headlight lenses commercially repaired for approximately $75-$150 or replaced for up to $1,500, the 3M Headlight Lens Restoration System costs a fraction of that price, and the entire process takes under an hour, depending on the extent of the damage. How Does it Work? The steps for using the 3M Headlight Lens Restoration System are as easy as 1-2-3. First, sand the hazed surface in a two-stage wet sanding process with the enclosed sanding pads until the surface is smooth and the dulled layer is removed. Then polish with the 3M plastic polish, and buff with the buffing pad to the level of clarity desired in the plastic. In addition to a standard household drill mentioned (1200-1600 rpm) used in the buffing process, you will also need 3M Automotive Masking Tape to protect the body panels of your car surrounding the work area, and a spray bottle and water used in the wet sanding process. Otherwise, everything that you need is included in the kit. Features: 3M abrasive technology and a polishing compound to restore hazy and dull headlight lenses, as well as other plastic lens surfaces on your vehicle. System is intended to restore two headlight lenses. Utilizes the muscle power of a common household (1200-1600 rpm) drill to do all the necessary sanding and buffing. This inexpensive kit saves hundreds of dollars and restores crucial night time visibility by restoring your own lenses. Easy, 3-step process requires as little as an hour to remove scratches and restore cloudy, dull lenses. What's in the Box 1-disc pad holder, 1-3M soft interface pad, 6-3M sanding discs, 4-3M finishing discs, 1- 3M trizact disc, 1-3M headlight lens polish/rubbing compound (1 oz), 1-buffing pad, step-by-step directions. Limitation of Liability Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. About 3M 3M is fundamentally a science-based company. They produce thousands of imaginative products, and they are a leader in scores of markets - from health care and highway safety to office products and abrasives and adhesives.

Meets or exceeds DOT/SAE standards, with particular consideration for photometric and safety compliance. There is a special coating on the lens surface that prevents hazing and fading, ensuring proper illumination and operational safety. Rigorous and accelerated cycling tests are carried out to ensure product service quality and durability.

The unique Turtle Wax process restores dull, yellowed headlights to like-new condition in less than 5 minutes per lens. The Lens Clarifying Compound quickly removes surface discoloration and may be all that is needed to restore clarity. Three multi-stage wet restoration pads allow you to focus on deeper discoloration and scratches to restore the lens to like new condition. No buffers or battery-operated machinary required. Each kit includes 3 restoration pads of various grits (2400 to 8000), 4 ounces of spray lubricant, 4 ounces of lens clarifying compound and a 4"x4" lens sealing wipe.

Meets or exceeds DOT/SAE standards, with particular consideration for photometric and safety compliance. There is a special coating on the lens surface that prevents hazing and fading, ensuring proper illumination and operational safety. Rigorous and accelerated cycling tests are carried out to ensure product service quality and durability.

Meets or exceeds DOT/SAE standards, with particular consideration for photometric and safety compliance. There is a special coating on the lens surface that prevents hazing and fading, ensuring proper illumination and operational safety. Rigorous and accelerated cycling tests are carried out to ensure product service quality and durability.

Sylvania EcoBright headlights offer excellent downroad and side road visibility while helping reduce environmental impact. The bulbs use 9 percent to 21 percent less energy than SAE maximum design specifications, and are 25 percent brighter compared to aged standard bulbs.

The 3M Lens Renewal Kit with Protectant is an easy-to-use five step system that can make hazy lenses a thing of the past. Designed to provide increased brightness to plastic lenses, this kit comes with everything you need to do the job--just add a drill. It will remove the hazy, yellow layer from lenses on trailers, snowmobiles, headlights/taillights, emergency vehicle light bars, plastic motorcycle lights, and more. Not only does it increase your night time visibility, the restored clarity will improve the appearance of your vehicle. The included protectant will keep your lenses looking cleaner longer.

In the past, replacing scratched, clouded or yellowed plastic headlight covers was an expensive necessity in order to preserve safety. But now with the 3M Lens Renewal Kit with Protectant, car, motorcycle, RV and trailer owners can shine and restore plastic lenses -- including headlights, tail lights, fog and directional lights -- to like-new condition for a fraction of the cost of visiting a garage. Combined with a user-supplied household drill (1200-1600 rpm), clean cloth and spray bottle, this kit includes everything needed for you to restore two headlight lenses, including 25' of 3M Premium Masking Tape used to protect auto body panels during the process. Renew clouded plastic headlights to crystal clarity. View larger. Plastic lens renewal in 5 easy steps. View larger. Protect body panels with included masking tape, then sand out scratches and dullness. View larger. Refine and reduce remaining scratches, then polish. View larger. The result is just-like-new visibility. View larger. The Danger of Clouded Plastic Light Covers Plastic is today's standard automotive construction material used for everything from headlight lenses to motorcycle windshields, plastic tail lights, trailers and more, yet it does have its drawbacks. Although it provides vehicles with lightweight, durable components, it can also yellow and haze with weather, sun and sand after less than ten years of exposure. This can result in both dangerously limited driver visibility on the road, as well as a downgraded appearance and value of the vehicle. While the impact on a vehicle's value varies, the dangers in terms of compromised visibility are clear. According to recent statistics compiled by the Motor Vehicle Lighting Council, compromised visibility due to dimmed headlights, taillights and other plastic features is a factor in 2.8 million auto accidents, 23,000 fatal crashes and 2,300 pedestrian deaths each year. The AAIA Car Care Council found that 26 percent of the cars it inspected had issues with their lighting system. Millions of cars on the road today have plastic headlight lenses. The problem increases with the age of the lens, and with the average age of cars on the road about 10 years old, the problem is growing. Yet there is something you can do about it - get the 3M Lens Renewal Kit with Protectant. The Do-It-Yourself Solution The 3M Lens Renewal Kit with Protectant is designed to give do-it-yourselfers an easy and affordable way to repair their vehicle's plastic lens surfaces. Containing various graded sanding pads, pad holders, buffing pads, polish, protectant, detailed instructions and even 25' of 3M headlight masking tape, it includes everything users need to turn their household drill into a low cost solution to the dangerous automotive problem of dull headlights. The Lens Renewal Kit with Protectant can also be used to repair hazing on other plastic surfaces, including taillights, emergency light bars, plastic motorcycle lights, trailers, snowmobiles and more. Compared to having headlight lenses commercially repaired for approximately $75-$150 or replaced for up to $1,500, the 3M Lens Renewal Kit with Protectant costs a fraction of that price and the entire process takes under an hour, depending on the extent of the damage. How Does it Work? The steps for using the 3M Lens Renewal Kit with Protectant are easy and can be performed by anyone, usually in less than an hour. First, clean the plastic surface to be worked on and tape around the body panels of your vehicle using the included 3M Premium Masking tape. Second, using your standard household hand drill (1200-1600 rpm) with attached 3M backing plate, sand away the hazed surface in a two-stage sanding process with the included P500 and P800 sanding pads. Third, refine and reduce remaining visible scratches using your drill/3M backing plate and the P3000 Trizact foam disc. Fourth, polish and buff lenses for clarity and shine using your drill/3M backing plate with orange foam compounding pad attached and a small amount of 3M headlight lens polish. Lastly, apply the protectant formula to seal out the elements and maintain crystal clarity. That's it - simple, fast and inexpensive. In addition to a standard household drill mentioned (1200-1600 rpm), you will also need a spray bottle and water used in the wet sanding and buffing processes. Otherwise, everything that you need is included in the kit. Key Features Easy, 5-step process requires as little as an hour to remove scratches and restore cloudy, dull lenses Includes protectant formula that locks out the elements to keep your lights crystal clearIncludes 25' of 3M premium masking tape for easy DIY repair May be used on most plastic lenses, including taillights, trailers, snowmobiles, emergency vehicle light bars, plastic motorcycle lights and more (System is intended to restore two headlight lenses) Features 3M abrasive technology and a polishing compound to restore hazy and dull headlight lenses, as well as other plastic lens surfaces on your vehicle Utilizes a standard household (1200-1600 rpm) drill to do all the necessary sanding and buffing This inexpensive kit saves hundreds of dollars and restores crucial night time visibility by allowing you to restore your own lenses What's in the Box 1 - 3M drill backing plate 1 - 3M Masking Tape PN 0000 25 ft. 4 - P800 grit white abrasive discs 6 - P500 grit yellow discs 1 - P3000 Trizact foam disc 1 - Orange foam compounding pad 1 - 1 oz. 3M headlight lens polish sample 1 - Container of protectant formula Limitation of Liability Except where prohibited by law, 3M will not be liable for any loss or damage arising from use of this 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. About 3M A recognized leader in research and development, 3M produces thousands of innovative products for dozens of diverse markets. 3M's core strength is applying its more than 40 distinct technology platforms – often in combination – to a wide array of customer needs. With $23 billion in sales, 3M employs 75,000 people worldwide and has operations in more than 65 countries.

Sylvania EcoBright headlights offer excellent downroad and side road visibility while helping reduce environmental impact. The bulbs use 9 percent to 21 percent less energy than SAE maximum design specifications, and are 25 percent brighter compared to aged standard bulbs.

Brand New Chevy/Gmc Headlights!Dot/Sae Approved - Aftermarket1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 Pickup Truck C/K 1500 2500 35001992 1993 1994 Blazer, Jimmy1992 1993 1994 1995 1996 1997 1998 1999 Suburban, Tahoe, YukonIncludes Both Driver & Passenger Side